index
5k Treatments Delivered to Aussie Looksmaxxers

Looksmaxxing Official

Important notice: Please read this guideline carefully before proceeding with the Looksmaxxing Micro-Infusion treatment.

1. How To Use Your System

Experience a complete in-clinic experience from the comfort of your home.
Here's everything will receive for your treatment.

  • LX Bio-Active Micro-Infusion Stamp Device (one per treatment)
  • Your selected 5ml serum formula(s) (one per treatment)
  • Centella Post Treatment Recovery Mask (one per treatment)
  • Medical Grade Handling Gloves
  • Medical Grade Sanitizing Wipes

Before your first use:

Wash your hands thoroughly.
Cleanse and dry your face completely.
Unbox a fresh, single-use infusion system — never reuse a system from a previous session.
Have your chosen serum vial ready and unopened until the moment of use

We recommend completing the micro-infusion treatment at night before you sleep for best results.

Step-By-Step Guide

  1. Step 1

    Start with a freshly washed and cleansed face. Pat dry. Sanitize your equipment with provided medical grade wipes.

    Note: Use our provided medical grade handling gloves for a completely safe and sterile treatment.

  2. Step 2

    Remove the cap and stopper from the 5ml serum vial and set aside. Remove the needle head from the micro-infusion system by twisting it off. Once done, set aside.

  3. Step 3

    Pour the 5ml serum vial into the micro-infusion system chamber. Ensure you empty all the liquid to access the full 5ml. Once complete, reattach the needle head to the micro-infusion system ready for use.

    Note: Turn the device upside down for 3 minutes so the serum saturates the needles.

  4. Step 4

    Remove the protective cap from the needle head and start to apply in sections. Working in small areas at a time, press the stamp firmly and evenly into the skin using a straight, vertical motion. When you press, hold for a second firmly into your skin for the serum to be injected completely.

    Note: When you first start, it may help for the first few stamps to apply extra pressure when stamping. This will allow the serum to activate. DO NOT drag or roll the device across the skin.

  5. Step 5

    Work through each section of your face and make sure you cover each area at least 5 times, or until you see only a few cm's of the serum remaining in the infusion system. If you start to see redness, this is normal. It's working.

    Note: If the serum stops coming through, tilt the device upward or lean your head back to help it flow. You can also turn the device upside down and tap the end firmly to push the serum down.

  6. Step 6

    When you're finished, you should have a few cm of left-over serum. Twist off the needle head off and pour the serum into your hands. Gently apply it onto your face by hand

    Note: Once your session is complete, remove and dispose of the device, it is single-use only and should never be reused

  7. Step 7

    It's time for the aftercare. Move straight into your post-treatment routine (see below)

After your treatment:

  • Apply your Centella Calming Recovery Mask for 20 to 30 minutes.
  • Avoid touching your face with unwashed hands.
  • Skip makeup application for at least 24 hours where possible.
  • Stick to gentle skincare products only, such as hydrating cleansers and simple moisturizers.
  • Avoid direct sun exposure and always apply SPF once your skin has settled
  • Avoid other active ingredients (retinoids, acids, vitamin C serums) for 24-48 hours post-treatment unless otherwise advised
  • Mild redness or warmth in the treatment area is a normal, temporary response — it typically settles within a day
  • Keep the area clean and avoid swimming pools, saunas, or heavy sweating for 24 hours
  • Avoid sun exposure, heat (saunas, workouts) and swimming.

2. Understanding Your Device

Most active ingredients never make it past your skin's outer layer — they sit on top, absorb slowly, and lose potency before they can do anything meaningful.

Our system solves that mechanically. Gold-plated micro-needles, each finer than a single strand of hair, create a direct path through the surface barrier. You'll feel minimal discomfort when going in — what happens underneath is the part that matters.

Why this actually works:

  1. Your skin responds to that controlled micro-injury the same way it responds to any injury — by kicking its own repair process into gear, which is where the firmer, smoother-looking results come from over time.
  2. At the same time, those same micro-channels give your serum a real way in. Instead of sitting on the surface waiting to slowly absorb, your actives get delivered right where your skin can use them.

3. Inside The Formula

Learn About Our Quality Control Standards →

Each of our three formulas is built around a specific complex of active ingredients, chosen for their role in supporting delivery by injection. Each formula has been specifically designed for micro-infusion, that means no fragrance or harmful actives that shouldn't be going into your skin.

LX-1 for Collagen Building is built around a peptide complex paired with a stabilised vitamin C derivative, aimed at supporting the appearance of firmer, denser-looking skin.

LX-2 for Skin Repair combines calming and barrier-supporting actives, aimed at helping the look of a stronger, more resilient skin barrier.

LX-3 for Glass Skin centres on tone-balancing and brightening actives, aimed at supporting a more even-looking complexion.

  • LX-1 For Collagen Building (Firming Peptide Complex)

    LX-1 For Collagen Building (Firming Peptide Complex)

    INCI INGREDIENTS: Water, Propandiol, Glycerine, Ethyl Ascorbate, Sodium Hyaluronate, Palmitoyl Tripeptide-5, Nicotiana Benthamiana Hexapeptide-40 sh-Polypeptide-47, Hexapeptide-9, Benzyl Alcohol, Sodium Benzoate.

  • LX-2 for Skin Repair (Calming Peptide Complex)

    LX-2 for Skin Repair (Calming Peptide Complex)

    INCI INGREDIENTS:
    Water, Propandiol, Niacinamide, Glycerine, Panthanol, Sodium Hyaluronate, Ectoin, Allantoin, Beta Glucan, Palmityl Tripeptide-5, Hexapeptide-9, Phenoxyethanol, Sodium Benzoate.

  • LX-3 for Glass Skin (Brightening Acid Complex)

    LX-3 for Glass Skin (Brightening Acid Complex)

    INCI INGREDIENTS :Water, Propandiol, Glycerine, Tranexamic Acid, Niacinamide, Ethyl Ascorbate, Sodium Hyaluronate, Benzyl Alcohol, Lactic Acid, Sodium Benzoate.

4. Application Area

This system is designed for use across the face and neck, giving you flexibility to target specific concerns:

Forehead: fine lines and early texture concerns

Under-eye orbital area: treat with extra care, using a lighter touch given the thinner skin in this zone

Nose: texture and congested-looking pores

Cheeks: firmness, volume, and overall tone

Chin & jawline: definition and texture

Neck: Firmness and early signs of laxity


Do not use on:

Active acne, open wounds, cuts, or broken skin

Areas with active rashes, eczema, psoriasis, or other inflamed skin conditions

Sunburnt skin

Directly over the eyelids or lips

Skin that has recently had another cosmetic or medical procedure, unless cleared by a professional

5. Do Not Use If

Do not use Micro-Infusion if:

  • Always patch test a new serum on a small area of skin before full use
  • Never reuse a needle head, under any circumstances
  • Never share your device or needle heads with another person
  • Always wash your hands and cleanse your skin before every session
  • Do not use if you are pregnant or breastfeeding without first consulting a medical professional
  • Do not use if you have a bleeding disorder, are on blood-thinning medication, or have a history of keloid scarring, without medical clearance
  • Stop use immediately and seek medical advice if you experience swelling, pus, prolonged pain, or any sign of infection
  • This product is not intended to diagnose, treat, cure, or prevent any disease or medical condition
  • Keep out of reach of children

6. Must Knows

How quickly will I see results?

Everyone's skin responds differently. Some people notice visible changes within one treatment; others see gradual improvement over weeks of consistent use. You'll feel it working right-away regardless, and we've had many clients report results the next morning when following our provided treatment instructions properly.

How often can I use the treatment?

For maximum results and sufficient skin recovery, we recommend 1 treatment every 2 weeks. You'll feel like you will want to do it more, because yes, it's addictive. And it genuinely feels good on your skin both while you're doing it and with what you will see the next morning. But skin recovery is just as important as the application itself. We recommend using micro-infusion for at least 3 months for best results.

Can I reuse a needle head if I only used it briefly?

No — needle heads are single-use only, regardless of how long or briefly they were used.

There is serum left over. Can I save it for another treatment?

No, each 5ml of serum is designed for ONE full treatment. Ensure you are stamping your entire face/neck and go over 3 to 5 times. Any leftover serum should be applied topically and rubbed into the face and neck after your treatment.

Is redness after treatment normal?

Temporary redness is a common and expected response. Persistent, worsening, or spreading redness is not. The redness from micro-infusion usually reduces by the next day.

Why isn't the serum coming out of the device when I stamp?

Our device is designed to ensure the flow of serum is not obstructed nor should it be hard for the serum to inject. If this does take place, please ensure when you are stamping that the serum is always sitting at the top of the needle head. You are also able to tap the top of the device to guide the serum.

When is the best time to do Micro-Infusion?

Late evening/night is ideal, so your skin can recover overnight without makeup, sun exposure, or friction. Always start on freshly cleansed, dry skin.

Can I use my own serum?

Only use the formulas that are provided by Looksmaxxing Official, as they have been formulated and designed to be safely injected into your skin.